Neptune TRICON E, Installation And Maintenance Manual

Page: 18 / 32

2-6 TRICON/E/E2/E3 Transmitter Installation and Maintenance Guide
Refer to Figure 2.6 for assistance with the following steps.
4. Position the TRICON transmitter on the meter and twist it clockwise until
it locks into place.
5. Place the register mounting ring on top of the TRICON transmitter with
the four rounded grooves facing upward.
6. Align the notch in the base of the register mounting ring with the terminal
cover of the TRICON and snap the ring into place.
When properly oriented, the register mounting ring should sit flush on top
of the TRICON transmitter.
7. Position the register on top of the TRICON transmitter and register
mounting ring, and twist it clockwise until it locks into place.
8. Drive the new seal pins into the register base and TRICON base to secure
the installation and prevent tampering.
Figure 2.6 Mounting the TRICON Transmitter