manualshive.com logo in svg

Neptune R450 MC, Installation And Maintenance Manual

Share
Download
Neptune R450 MC Installation And Maintenance Manual Download Page 16

Product Description

2

R450 Mini Collector Installation and Maintenance Guide

Types of R450 MC Installations

There are three R450 MC variants depending upon the mounting option, 
power supply option, and backhaul communications required. Each type 
is powered by either 12VAC or 12VDC.

Neptune provides an installation kit for each type of installation. The 
standard configuration of the R450 MC backhaul is Ethernet or a 
cellular modem. Other available backhaul options include using an 
Ethernet connection.

Mounting Options

Supports: 

•

Existing light poles

•

Towers

•

Wall mount

•

Rooftop mount

The R450 MC can be mounted on a wall, a pole, or a stand as shown in 
the illustrations on the following pages.

Power Supply Options

•

AC  transformer

•

UPS 

•

Solar

Backhaul Communications Options

•

Ethernet

•

Cellular modem

Summary of Contents for R450 MC









































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands