WAV QuickStart Guide
Page 9
Optionally, the WAV Alarms may also be configured and the Home Position of each WAV set using the display
menu.
Before setting the Home Position of each of your WAVs, the WAV outlet(s) must be turned OFF.
To set the WAV Home Position using the Apex web pages, navigate to Configuration -> Module Setup.
Then click the Set Home Position button.
To enable or disable any of the WAV Alarms using the Apex web pages, navigate to Configuration ->
Module Setup. Then click to enable or disable the 4 WAV Alarms as desired; a checkmark means that
alarm is enabled. When done, click the Update button.
To enable or disable any of the WAV Alarms using the Apex display, navigate to Setup -> Module
Setup -> Config Module -> WAV_#, then choose the Alarm you wish to enabled or disable. Press the
center button to toggle between On and Off. Press the Exit or Home button when done.
To set the Home Position using the Apex display, navigate to Setup -> Module Setup -> Config Module
-> WAV_# ->
Summary of Contents for Apex WAV
Page 1: ...Apex WAV QuickStart Guide...
