Using the 2
nd
Relay Function <Double Door Mode>
In double door mode, enter the second zone management menu to manage the settings
only related to the second zone, the steps are:
* key (Hold on for more than 2 seconds), (Admin Password) # or to read zone 2 Set-card.
Note:
Add number “2” in front of 6 digit of zone 1 Admin Password
,
-
it will lead user into zone 2 management menu.
-
if the Admin Password is correct, the indicator light will turn to blue and then back
to blue flashing status.
-
Other operations must be operated under this status.
-
If the user forgets the admin password or user need to use the management menu
for many times can use this read the zone 2 Set-card operation instead.
-
There are only below menu numbers are effective in the zone 2 management menu:
00, 01, 02, 10-12, 21, 22, 30-36
4.1.5 Set Machine Mode
03, 0#, Set to Reader mode.
03, 1#, Set to Single-door mode.
03, 2#, Set to Double-doors mode.
4.1.x.xx To add user card or PIN
Specify ID number and read card to add user:
11, (ID) #, read card, (ID) #, read card, …
Specified ID number and input 4-6 digits PIN to add user:
11, (ID) # (User PIN) #, (ID) # (User PIN) #, …
Note: ID number are 1~5 digits between 1~20000, User PIN in zone 1 are any 4~6 digits,
-
except 1234 <Not to be used for USER PIN>
-
User PIN in Zone 2 are any 7 digits.
Eg.
2<6 Digit - Inst Code/Admin Password>
032# <Set Double-Door mode>
11(ID, User Location)#Any 7 Digit PIN <To Activate Relay 2>
11(ID, User Location)# read card<To Activate Relay 2>
Exit Menu’s
## The Authorization Cards must be Ordered separately and do not come with the ACKPWB6K
To Activate follow the steps below,
Press and Hold * for 2-
3 Sec’s until Red LED Flashes
Note: Add number “2” in front of 6
digit of zone 1 Admin Password,
<Enter>2,Admin Password #
015#<Read Card> <Read Card><Read Card> (Max 3 Cards for this Operation)
Note: If only one Authorization Card is required, simply read 1 Card and Exit programming
-
Exit Menu’s
NEPTUNE
Quick Reference Guide
