HOW TO……..
Set for Single Door mode, with Super-open password
Press and Hold * for 2-
3 Sec’s until Red
LED Flashes
<Enter>Admin Password #
03 1# - Single door mode (Default)
00 (8 digits #) Must be 8 digit Super-open password
-
Exit Menu’s
Use Super-open password
Press and Hold * for 2-3
Sec’s until Red LED Flashes
<Enter>Admin Password #
33
0#
- Disable all User Access
- Exit Menu
’
s
No User Codes will operate the Output
<Enter> 8 digit Super-open password to operate the Output
<Enter>Admin Password #
33
1#
- Enable all User Access
-
Exit Menu’s
All User Codes will operate the Output, Super-open password will also operate Output.
HOW TO……..
Reset Keypad Admin Code to Defaults
•
Power off Keypad
•
Press & hold * key whilst power up, until you hear 2 beeps and see Amber LED
•
Release * Key and this will Default the Installer Code
•
Press & Hold * key for 2-3 Secs and wait for Flashing Red LED, then release
•
00 <Enter> New 6-digit PIN # <Enter> New 6-digit PIN # <Green> LED will confirm
Restore Default Settings
•
Press & Hold * key for 2-3 Secs and wait for Flashing Red LED, then release
•
<Enter> 6-digit PIN # <Green> LED will confirm
•
09 0000 # - Restore default settings, admin password and user information
remain unchanged
•
20 0000 # - Delete all users in Zone 1 and Zone 2
-
Exit Menu’s
NEPTUNE
Quick Reference Guide
