EnergyBar 6 - Setup Guide
Page 2
ENERGYBAR 6 FEATURES
•
6 Independently controllable 230V outlets.
•
Built-in 4 port AquaBus hub so that accessories can be easily added.
•
Communicates with and powers the AquaController Apex Display, base unit and
accessories through the AquaBus.
•
Active electrical current monitoring and logging through the AquaController Apex.
•
Fail-safe setting. If communication failure occurs between the AquaController Apex
and the EnergyBar 6, each outlet can be configured to revert to a user settable
default setting.
•
High reliability direct wired connection to the Apex System through the AquaBus
(does not use X10).
•
Two outlets with relay switching for higher power switching.
•
Up to 240 EnergyBar 6 devices can be connected together for up to 1440 switched
outlets on a single AquaBus.
•
Built-in circuit breaker protected.
•
4 Mounting Holes for easy installation.
•
Compact custom aluminum enclosure (9.6" x 4.10" x 1.8").
STATUS INDICATOR
The EnergyBar 6 has a single LED status indicator to provide the operational status of
the EnergyBar 8. The table below lists the possible states of the indicator along with the
indicated status.
LED State
Status
Off
The EnergyBar 6 is not powered
Blinking Yellow The EnergyBar 6 is in boot loader mode and has not been
configured by the AquaController Apex
Solid Yellow
The EnergyBar 6 is in boot loader mode and has been configured
by the AquaController Apex
Blinking Green The EnergyBar 6 is running but has not received commands from
the AquaController Apex. Outlets are in Fallback mode
Solid Green
The EnergyBar is running and is receiving commands from the
AquaController Apex base module
Summary of Contents for EnergyBar 6
Page 1: ...EnergyBar 6 Setup Guide...
