Neox crosser, User Manual

Page: 17 / 20

NEOX User manual - Edition 01-2015 17
c
hange
(
Or increase in gear
)
tHiS is the change from one gear to a higher gear, i.e. from gear 1 to 4 or 8, depend-
ing on the model.
This may be carried out in any situation and dynamics of use without any problem,
applying either minimum or maximum pressure on the pedal cranks (added to the
thrust torque of the motor).
The gear change is sequential and has been designed so that it does not require any
special skill by the user.
In fact the user can set off with any gear engaged. When you press the button to
make the change, the system first engages the desired gear, and once this is en-
gaged, disengages the previous gear. This allows an excellent degree of fluidity and
the low noise levels produced by the system are second to none.
c
Limb
(
Or decrease in gear
)
tHiS is the change from one gear to a lower gear, i.e. from gear 4 or 8, depending
on the model, to gear 1.
As it is an extremely rapid change, the climb must be performed while bearing in
mind some features of the system:
The bike incorporates a SAFETY system that inhibits downward gear changes by
the user while pushing on the pedal. In the event the wrong button is pressed or
the repeated pressing of the button, this system avoids a sudden increase in ped-
alling frequency that could unbalance the user, resulting in danger to themselves
or others.
Therefore, to perform the CLIMB (increase in gear) just REDUCE pressure on the
pedal to a minimum until the sensor measuring the torque transmitted to the pedal
gives consent (via software) to the system to change down a gear.
This system allows you to change up a gear in total safety both for the user and
for your Neox device.
Gear
-
Gear
+
01