manualshive.com logo in svg

NeOvo EcoNox EFU 22, User Manual, Page: 31 / 44

Share
Download
NeOvo EcoNox EFU 22 User Manual Download Page 31

6. Select the desired day number by pressing the   or   key until the 

icon dedicated to the desired day flashes. 

Day selected

Description

,  ,  ,  ,  ,  , 

every day of the week

Monday

Tuesday

Wednesday

Thursday

Friday

Saturday

Sunday

Note
The   key is used to move to the right.
The   key is used to move to the left.

7. Confirm the selection by pressing the 

 key.

8. Set the start time for the period     by pressing the   or   key. 

Note

No setting: 10 minutes
The setting       determines the end.

9. Confirm the selection by pressing the 

 key.

10. Select the status     that correspond to the period     by press­

ing the   or   keys. 

Status     to     for periods 

   to   

Description

 

comfort mode activated

   

reduced mode activated

11. Confirm the selection by pressing the 

 key.

12. Repeat steps 8 to 11 to define the comfort periods     to     and 

the associated status     to    .

13. Go back to the main display by pressing the 

h

 key.

Example:

Times

 

 

 

 

 

 

 

 

 

 

 

 

06:00-22:00

06:00

 

22:00

   

   

06:00-08:00

11:30-13:30

06:00

 

08:00

   

11:30

 

13:30

   

   

06:00-08:00

11:30-14:00

17:30-22:00

06:00

 

08:00

   

11:30

 

14:00

   

17:30

 

22:00

   

Fig.45

MW

-1

0

0

0

5

9

4

-1

Fig.46

MW-5000142-2

Fig.47

MW

-5

0

0

0

1

4

3

-3

8  Control panel settings IniControl 2

7642053 - v03 - 17112016

EFU C

31

Summary of Contents for EcoNox EFU 22













































Reviews:

No comments