manualshive.com logo in svg

NeOvo EcoNox EFU 22, User Manual, Page: 28 / 44

Share
Download
NeOvo EcoNox EFU 22 User Manual Download Page 28

Tab.12 List of parametersPC: Process Counter

Parameter

Description

Unit

PCB     

PCB 

    /

   

       

Number of burner start-ups.

-

available

not available

       

Number of hours of burner operation.

hours

available

not available

       

Number of safety lock-downs (E36).

-

available

not available

TIME PROG Sub-menu 

Tab.13 List of parameters

Parameter

Description

Factory setting

Timer program for Mondays.

06:00 - 22:00

Timer program for Tuesdays.

06:00 - 22:00

Timer program for Wednesdays.

06:00 - 22:00

Timer program for Thursdays.

06:00 - 22:00

Timer program for Fridays.

06:00 - 22:00

Timer program for Saturdays.

06:00 - 22:00

Timer program for Sundays.

06:00 - 22:00

Sub-menu CLOCK

Tab.14 List of parameters

Parameter

Description

HOURS

Hour.

Can be set from 0 to 23.

MINUTE

Minute.

Can be set from 0 to 59.

DATE

Date.

Can be set from 1 to 31.

MONTH

Month.

Can be set from 1 to 12.

YEAR

Year.

Can be set from 0000 to 2100.

8  Control panel settings IniControl 2

28

EFU C

7642053 - v03 - 17112016

Summary of Contents for EcoNox EFU 22













































Reviews:

No comments