Neousys Technology POC-551VTC Series User Manual Download Page 93

Page: 93 / 113

POC-551VTC

OS Support and Driver Installation

5.1

Operating System Compatibility

The system only has driver support for Windows 10 64-bit. For Linux support, please

use Linux kernel versions no later than 4.10. The following list contains the operating

systems which have been tested in Neousys Technology.



Microsoft Windows 10 IoT 2019 LTSC Value



Microsoft Windows 10 Professional 64-bit RS5



Ubuntu 18.04.1 LTS* (4.10 kernel)

NOTE

*For Linux system, user may need to manually compile and install the driver for AMD

Vega graphics or Intel

I350-AM4 GbE controller if the driver is not embedded in

kernel. You can visit AMD website for further information.

Neousys may remove or update operating system compatibility without prior notice.

Please contact us if your operating system of choice is not on the list.

Summary of Contents for POC-551VTC Series


















































































































Search results

Summary of Contents for POC-551VTC Series

Reviews:

Related manuals for POC-551VTC Series

Brands by name

Popular brands

Neousys Technology POC-551VTC Series, User Manual

Search results

Summary of Contents for POC-551VTC Series

Reviews:

Related manuals for POC-551VTC Series

Brands by name

Popular brands