PB-2500J-PCIe/ CSM
19
3
PB-2500J-PCIe/ CSM Installation
Before disassembling the system enclosure and installing components and modules,
please make sure you have done the following:
It is recommended that only qualified service personnel should install and
service this product to avoid injury or damage to the system.
Please observe all ESD procedures at all times to avoid damaging the
equipment.
Before disassembling your system, please make sure the system has powered
off, all cables and antennae (power, video, data, etc.) are disconnected.
Place the system on a flat and sturdy surface (remove from mounts or out of
server cabinets) before proceeding with the installation/ replacement procedure.
Acquire a DB9 COM (female) to COM (female) cable for PB25000J-PCIe/ CSM
installation.
NOTE
The installation process of PB-2500J-PCIe or PB-2500J-CSM5/ 7 Cassette module
does not require a driver installation process. However, you need to download the
software
“
PB-2500J Parameter Configurer
”
to access and manage the
ultracapacitor-based power backup solution.
