Neousys Technology Nuvo-8240GC Series, User Manual, Page: 86 / 139

Nuvo-8240GC
86
4.1.4 Delay for PEG Initialization
This setting offers delay in milliseconds for PEG port initialization and PCI enumeration. By
increasing the delay value, it may eliminate compatibility issue(s) with some PCIe add-on
cards.
To set PEG delay in milliseconds :
1. When system boots up, press F2 to enter BIOS setup utility.
2. Go to [Advanced] > [System Agent (SA) Configuration] > [PEG Port Configuration] >
[Delay for PEG Init] and press ENTER.
3. A small window appears and you may enter a maximum delay value of up to 30,000ms.
4. When done, press F10 to “Exit Saving Changes”