Nuvo-8240GC Series
67
3.2.8
NVIDIA
®
Tesla T4 Installation
WARNING
To reduce the risk of damage, DO NOT remove the graphics card from the antistatic bag
before it is ready to be installed into the Cassette module!
NOTE
For installation compatibility, please consult with Neousys before purchasing a graphics
card.
The system can support up to two NVIDIA
®
Tesla T4 inference accelerators. The placement of
the rear exhaust fan creates a sealed wind tunnel to bring in cold air to the graphics cards and
expels hot air to offer extreme system stability and reliability. To install a PCIe graphics card,
please refer to the following procedure:
1.
Please refer to the section “
”.
2.
Locate the PCIe x16 slots on the daughter board, indicated in
red
and
blue
. It is
recommended to install your initial graphics card into the
red
PCIe slot as this makes the
second graphics card installation procedure more convenient. For instruction and
demonstration purposes, the following procedure will install into the
blue
PCIe slot.
3.
Remove the corresponding enclosure bezel(s) to the PCIe slot you wish to install to .
Summary of Contents for Nuvo-8240GC Series
