Nuvo-8000 Series
76
4.1.2
COM Port High Speed Mode
The high speed mode of each COM port effectively allows for the port's baud rate generator to
operate at 8x the speed with an effective baud rate of 921,600 bps (115,200 x 8). Please refer to
the following instructions on how to enable the high speed mode for your COM port (COM1
used as an example).
To set COM port high speed mode:
1.
Press
F2
when the system boots up to enter the BIOS setup utility.
2.
Go to
[Advanced] > [Peripheral Configuration]
.
3.
Enable or set the
[Set COM1 Mode as]
option to the desired mode.
4.
Highlight
[HS Mode]
and press ENTER to bring up options, highlight
[Enable]
and press
ENTER.
5.
Once set, press
F10
to save setting and exit.
Summary of Contents for Nuvo-8000 Series
Page 1: ...Neousys Technology Inc Nuvo 8000 User Manual Revision 1 0...
Page 20: ...Nuvo 8000 Series 20 1 2 2 Nuvo 8003 Side View 1 2 3 Nuvo 8003 Bottom View...
Page 22: ...Nuvo 8000 Series 22 1 3 2 Nuvo 8023 8032 8041 Side View 1 3 3 Nuvo 8023 8032 8041 Bottom View...
Page 53: ...Nuvo 8000 Series 53 6 Gently lift and separate the motherboard heatsink from the enclosure...
