Nuvo-8000 Series
71
3.6.2
Powering On Using Wake-on-LAN
Wake-on-LAN (WOL) is a mechanism to wake up a computer system from a S5 (system off with
standby power) state via issuing a magic packet. The system’s Wake-on-LAN compatible GbE
port is shown below.
NOTE
Please make sure the Intel chipset and Ethernet driver has been properly installed prior
to setting up WOL function.
To enable WOL function, please set up WOL settings in the BIOS and in the operating system
by follow the steps described below.
1.
When the system boots up, press F2 to enter BIOS setup utility.
2.
Go to the
[Power]
>
[Wake On LAN]
and set it to
[Enabled]
.
3.
Press F10 to “
Save changes and exit BIOS
” and allow the system boot into the operating
Summary of Contents for Nuvo-8000 Series
Page 1: ...Neousys Technology Inc Nuvo 8000 User Manual Revision 1 0...
Page 20: ...Nuvo 8000 Series 20 1 2 2 Nuvo 8003 Side View 1 2 3 Nuvo 8003 Bottom View...
Page 22: ...Nuvo 8000 Series 22 1 3 2 Nuvo 8023 8032 8041 Side View 1 3 3 Nuvo 8023 8032 8041 Bottom View...
Page 53: ...Nuvo 8000 Series 53 6 Gently lift and separate the motherboard heatsink from the enclosure...
