Nuvo-3000 Series User’s Manual
Copyright © 2013 Neousys Technology Inc. All Right Reserved.
Page 58 of
101
3.3
Install a 3.5” HDD (Nuvo-3000TB Only)
Nuvo-3000TB provides SATA#2 port which is used in conjunction with dedicated HDD
brackets and thermal insulation mylar to accommodate the 3.5” HDD. You can
install/replace the 3.5” HDD attached to SATA#2 port by following the steps listed below.
1. Follow step#1 in section 3.1 (for Nuvo-3000TB) to remove the bottom cover. You can
see SATA#1 and SATA#2 ports on the PCBA. Identify SATA#2 to install the 3.5” HDD.
.
2. Find two HDD brackets, two HDD thermal pads, four #6-32 screws, four damping pads
and four M3 step screws in the accessory box.
3. Attach the thermal pads to the bottom side of the 3.5” HDD. Please notice that two
thermal pads are in different thickness. You can choose the proper one (or two) for
your 3.5” HDD. Fix the HDD brackets to the 3.5” HDD using #6-32 screws and then
insert the damping pads to the HDD brackets.