Neotren MT-009 User Manual Download Page 4

 

   

3.10  Do  not  return  to  the  starting  position  too  quickly  in  case  of  any  damage  to  the 
weight stacks, instead, you must slow down when getting near. 
3.11  No  touching  the  steel  cables  or  moving  parts  in  use  in  case  of  jamming  the 
hands! 
3.12 Cardiac patients and children below 12 must not use the unit. 
3.13 This equipment is in compliance with EN 957-2 class S (S=studio). 
3.14  The  max  training  weight  is  150kg  (330pound)  while  the  max  user  weight  is 
150kg (330pound).   
3.15  The  machine  should  be  located  stably  with  a  space  of  2000mm

×

2000mm  kept 

around. 
3.16 The unit is firstly used in trainings for professionals and secondarily for fitness in 
residential communities and companies. 
3.17 Please stop immediately and go to the doctor if you have any discomfort such as 
dizziness, nausea, etc.. 
3.18  The  unit  must  be  assembled  and  fixed  stably  on  flat  ground  to  avoid  any 
movement of the machine in use. 
3.19 The machine shall only be used indoor and kept away from moisture. 
3.20 Please wear suitable dresses and shoes in exercise. 
3.21 A warm exercise of 5~10min must be had before using the unit. 
3.22 Improper movements are not allowed to have on the unit. 
3.23 Please exercise under instruction of professional coach. 
3.24 Please check if the unit is well fastened before starting your workout. 
3.25  Any  adjustment  to  the  unit  which  may  interfere  with  the  users’  exercise  is  not 
allowed. 

 

 

4. USAGE GUIDANCE 

 

MT-009 Lower Back Machine 

Targeted muscle: back muscles 
Dimension:1275mm

×

1180mm

×

1680 mm 

N.W.: 220kg 
Usage guidance:   
(1)

 

Read all warnings and instructions before using the unit. 

Summary of Contents for MT-009













Reviews: