2 - USE
Selecting a job
K
Loading documents (feeders A and B)
M
Loading envelopes
L
The machine is ready for use when the following menu is displayed.
The job function makes it possible to define and store the format of the main envelope and the document figuring
the address, and to define the appropriate feeder selection for the application to be processed.
n
o
Select the “job number” field by holding down the key
until it is highlighted.
Use the keys to select a job number.
p
Check the contents of the 9 pre-configured jobs and
select the one which corresponds to the application to
be processed, or modify the required field to adapt a job.
Then proceed to the next steps.
Envelopes must be loaded printable side up with the flap at the top as in the following diagram.
Adjust the guides to fit
the envelope format.
n
o
Unlock the side guides
lever (in position) and
open the side guides.
Load the envelopes
according to this
diagram.
p
q
Move the guides to the
width of the envelopes
so that they rest lightly
against the envelope
stack, and lock the
lever. (in position)
Large format documents must be loaded vertically, in reading direction with the address-face pointing towards the
user according to the following procedure.
Release the pressure
units
n
o
Load documents
vertically
Adjust the side guides to
rest lightly against the
document stack and lock
p
q
Lock the pressure units
READY : START to process a job
or to select line to modify
Counter
:
1 2 3 4
Job number
: 02
Feeder
:
AUTO A+B+C
Document
:
A4 (297 mm)
Envelope
:
C6/5 DL CLOSED
Address height
:
+0 mm
