Starting the machine: first run
I
Entering code: first run.
J
The machine’s user default language is set to English. This can be changed by
holding down the key and pressing the ON/OFF switch located at the back of
the machine.
n
o
Select the “language” field using the key
Use the keys to change the language setting
q
p
Press to store changes
Press to return to the user menu
For security reasons, the machine is protected with a code. This code must be entered the first time the machine is
used. Each machine is assigned a unique code sequence.
It is made up of 10 numbers and should be entered using the following screen:
n
Press to display the correct number in
the designated position
o
Press to validate the number
(the cursor will proceed to the following number automatically)
p
Repeat steps 1 and 2 until the full code has been
entered!
(10 numbers).
! Don’t forget to validate the last number using the key
before saving the code.
q
In the event of an input error, press
and repeat the procedure from stage
n
r
Once the code has been entered correctly, save
by pressing
The machine is ready for use.
Enter the code in this direction
ESC
ESC
ESC
START
STOP
START
STOP
AUTHORIZATION CODE SET UP
: Select number
START-STOP : Validate number
ESC : exit
Press to confirm
Code : 0000000000
MACHINE SETUP
Serial Number : 0000000000
Press to confirm
CONFIGURATION MACHINE
Numéro Machine : 0000000000
Appuyer sur pour continuer
Language
: ENGLISH
Set
: Env. / Doc.
Double Det. Bin C
: DISABLE
Langue
: FRANCAIS
Personnalisation
: Env. / Doc.
Det. Double Bac C
: DEVALIDER
