40
3.10
Edit a Job
To edit an existing job:
1. Press
from “main menu (2)” (see 2.4.1 ”Main Menu” on page 10).
2. Enter the pin code.
The “job menu” opens (see 2.4.5 ”Job Menu” on
page 14).
3. Press .
The “edit job” menu appears.
4. Press the arrows if you want to select an other
job number.
5. Press
to confirm the selected job
number.
The “job settings” screen opens. Refer to 3.9.1 ”Job Settings” on page 32 for the
meaning of all buttons and settings.
6. Press
to save the job with the entered settings under the specified job number
and name.
To name a job, see 3.9.7 ”Job Name” on page 38.
7. Press
to perform a test run with the new job settings (see ”Perform a
3.11
Copy a Job
To copy existing job settings or Fill & Start jobs to a new job:
1. Press
from “main menu (2)” (see 2.4.1 ”Main Menu” on page 10).
2. Enter the pin code.
The “job menu” opens (see 2.4.5 ”Job Menu” on
page 14).
3. Press .
The “copy job” menu appears.
4. Press the arrows if you want to select an other
job number to copy from or to copy to.
