52
4.4.3
Adjust Side Guides
Adjust the side guides:
1. Take a stack of documents/BREs and place them
in the feed tray.
BREs with flap down and leading (top side
pointing to machine).
2. Adjust the side guides by turning the thumb
wheel
A
so the documents/BREs just fit and can
move without resistance.
Too much play causes skewing.
4.4.4
Document Separation
When the maxiFeeder™ is used at an automatic separation feeder, the separation is set
automatically.
The maxiFeeder™ can also be used on a feeder position with a manually adjusted
separation.
To adjust, proceed as follows:
1. Remove feeders 2 and 3.
Note
The lowest feeder is feeder 1.
2. Squeeze the two blue handles
A
and
B
and shift
the feeding plate
C
as far as possible to the
front.
3. Push knob
D
forward until it clicks.
4. Place a document/BRE on the feed tray and slide
it in the machine till the leading edge is not
visible anymore. Turn knob
D
counterclockwise if
the separation is set to narrow.
5. Push the document/BRE between the rollers.
6. Turn knob
D
clockwise to get more resistance
and counterclockwise if the separation is set to
narrow.
The separation is adjusted correctly when a
slight resistance is felt on the document/BRE.
7. Pull knob
D
back when ready.
8. Remount feeders 2 and 3.
4.4.5
Feeding Documents
To feed documents:
1. Squeeze the two blue handles
A
and
B
.
A
A
B
C
D
