Neopost AS-Orbit Base R2L, Mounting Instruction, Page: 5 / 12

5
12 On the front side remove the 4 screws for the cover-
plate and assemble it on the back side.
13 Unplug the connector for the motor.
14 Remove the 4 screws M8 of the support brackets at the
lower surface of the conveyor.
The figure shows only one support bracket.
Attention: Do not destroy the head of the screw;
otherwise you have to exchange it. (DIN 7984.013)
15 Disconnect the ground cable near the motor gear.
16 Now the complete transport unit can be lifted and
turned to 180°. Pay attention that the hose clip of the
motor don’t touch the frame (arrow1).
For the moment fix the 4 screws M8 loosely, at the
support bracket.
Remove the cover of the hole for the motor cable and
assemble it on the other side (arrow2).
17 Reassemble the intake socket.