Neonode® Touch Sensor Module User's Guide
Getting started with Touch Sensor Module Evaluation
https://support.neonode.com
8
6. The green LED on the interface board lights up when connected.
7.
When the sensor module has enumerated, it will act as a touch screen USB HID device.
8.
Put an object in the touch active area, touch HID reports will be sent to your computer.
9. To visualize touches, you can for for example use Paint (default Windows application) and draw lines by
moving you finger in the touch active area.
2.2 Getting Started with Sensor Evaluation - Workbench and USB
2.2.1 Required Equipment
The following equipment from the evaluation kit is required:
•
1 x Neonode Touch Sensor Module
•
1 x FPC cable with connector
•
1 x Interface board
Additional required equipment:
•
Computer
•
Operating system: Windows 8.1 or Windows 10.
•
Software requirements:
.
NET Framework 4.5 or higher is required and can be downloaded from
Microsoft's official website. Windows 8 and higher has this installed by default.
• USB cable with a Micro USB type B connector
C
Make sure that the USB cable transmits both power and data and not only power.
