Neomatica. LLC. Tracker ADM50 GLONASS / GPS. Rev.1.2 dated 03.10.2018
20
20
TRACK X,Y,Z,A
Example:
TRACK
3,10,300,10
TRACK X,Y,Z,A
Example:
TRACK 3,10,300,10
X
– minimum speed
Y
– angle in degrees
Z
– distance in meters.
A
– speed change in km/h/s
Setting the quality of the route drawing. A new point
on the route is setting if the direction of movement has
changed more than by the angle Y or the distance to
the previous point is greater than Z or the speed
change per second is greater than A. This mechanism
is switching off if the speed becomes less than X, in
order to avoid the excess of points at maneuvers at
low speeds, while the period of recording of points will
be determined by the parameter X of the PERIOD
command.
Changing the parameters of the TRACK
command can lead to incorrect work of the
tracker!
21
TSTIME X
Example:
TSTIME 300
TSTIME=X
Example:
TSTIME=300
X
– the time, through which the
"deep statics" mode activates,
in seconds.
Setting the time through which the transition to the
"Deep Statics" mode will occur when there is no
movement.
22
TSMODE X,Y
Example:
TSMODE 1,1
TSMODE=X,Y
Example:
TSMODE=1,1
X
– status of GSM module,
X=0
– off; X=1 – on.
Y
– status of GLONASS/GPS
module,
Y=0
– off; Y=1 – on.
Setting of disabling of the GSM and
GLONASS/GPS modules in the Deep Statics
mode.
23
SOSPOL X
Example:
SOSPOL 0
SOSPOL=X
Example:
SOSPOL=0
X=0
– triggering on press (contact
closure).
X=1
– triggering on release
(contact opening).
Setting the triggering mode of the "SOS" button.
24
POFF X
Example: POFF 0
POFF=X
Example: POFF=0
X=0
– Power button
unlocked.
X=1
– Power button
locked.
Setting the prohibition of disabling the tracker using
the Power button.
