Chapter
GENERAL INFORMATION
NEOFOLD HS
VERSION:
NF.HS-07-03/2015-GB
1-5
Description of the machine
1.11
Correct use of the machine
1.11.1
The machine must be used only to fold the media which it has been designed for. The
main feature is the possibility of folding drawings with free format for any length and with
standard formats according to DIN 824 standards.
The width of the fold can be 190 mm or 210 mm, with adjustable margins (using the
keyboard), whereas the transversal fold has a length of 297 mm and 305 mm.
The folded drawing can come out of the front or back of the machine. This feature can be
selected using the relevant button, both sides are fitted with functional and versatile
baskets.
The machine is made of physically independent and autonomous groups, therefore the
proper use of the machine also refers to the correct functioning of only one part of it.
Use of the machine
The installation and the ordinary maintenance of the machine must be carried out by
qualified personnel only.
The machine was designed to be used in an area with the characteristics indicated in the
section
CHARACTERISTICS OF THE AREA THE MACHINE IS PLACED IN 5.5.1
and in
the section
POWER DATA 3.2
.
Incorrect use of the machine
1.11.2
Any use other than that indicated in part
1.11.1 Correct use of the machine
is to be
considered incorrect, especially:
Using the machine in ways which differ from those which it has been designed for,
represents an anomalous condition and could therefore damage the structure of the
machine.
Using the machine without its protections and without the safety equipment it is
provided with: particularly without the fixed protections that block access to the rotating
parts.
Not observing the procedures of this manual and especially maintenance and repair
ones.
Using the machine in an area at risk of fire or explosions because it is not equipped
with flameproof components.
Using the machine in an explosive area.
Using the machine in an inflammable area.
