background image

Menu

1. Press to enter Menu
2. Press and hold for 2 seconds to enter the Quick Settings mode where you can:

Select

1. Press to select the highlighted Menu title.
2. Press and hold for 2 seconds to start recording the current screen into the Events folder (emergency 
recording).
3. When the power cord is disconnected, press to enter the Photo mode.
4. Press to switch a detection mode (X-COP, City, Motorway, Turbo).

The City mode is the mode of the lowest police radar detection sensitivity. At the same 
time, it also means the lowest number of false warnings.

The Motorway mode is the mode of standard police radar detection sensitivity. The 
number of false warnings is medium.

The Turbo mode is the mode of the highest police radar detection sensitivity and the 
poorest interference resistance.

The Х-СОР mode is the mode of auto selection of frequency bands, sensitivity modes 
(City/Motorway) and false warning filters based on the vehicle speed.

- turn the radar module on/off 
(where necessary);

- turn the microphone to record audio inside the car on/off; 

- turn the video recorder on/off;

Driving

In traffic jams

Small residential 

areas

Big cities and 

highways

Highways and 

motorways

Speed

0-24 km/h

25-49

km/h

50-89

km/h

90+

km/h

K

ON

ON

ON

ON

ON

ON

ON

ON

ON

ON

ON

OFF

Silent.

Display only

Sound  

display

Sound  

display

Sound  

display

City

City

Motorway

Motorway

Arrow:

Mode

Z-signature 

filter

Notification

4

Summary of Contents for X-COP 9300 Series













Reviews: