background image

Anti-glare CPL filter

Controls and functions

Up/Down

1. Press to adjust the volume.
2. When in Menu, press to switch the Menu titles.
3. Press and hold both keys for 2 seconds to turn the radar module on or off, where necessary. When 
the radar mode is off, the mode icon is inactive.

2. Neoline Fuse Cord 3 pin

(supplied with Neoline Х-СОР 9300 only.
Not supplied with other Neoline Х-СОР 93ххх* models)

Connect the power cord to the fuse box as the diagram shows.
Connect the power cord to the fuse box in accordance with the instructions:
- Connect the BATT (+) power cord to the source providing stable 12V voltage.
- Connect the ACC cord to the power source (ignition circuit).
- Connect the GND (-) cord to the car earth.

(supplied with Neoline Х-СОР 9300 only. Not 
supplied with other Neoline Х-СОР 93ххх* models)

The CPL filter helps reducing glares and reflections 
on the windshield. Besides, it improves the video 
contrast significantly. Rotate the filter to minimize 
the glares. It is best to use the filter in the day time 
as the image may darken at night. Around the hybrid 
lens, there are special notches to mount the CPL 
filter.

3

Summary of Contents for X-COP 9300 Series













Reviews: