68
• Setting the adjustment for the input voltage measurement and its normal value as 12 V or 24 V (it is necessary in case
of incorrect shutdown due to any power supply voltage drop to the pre-set threshold)
<!-- Safeguard Setting -->
• GPS receiver settings (setting of the false and/or dangerous zones ranges, enabling/disabling certain types of radars,
etc.) - <!-- GPS POI Settings -->
• Bandwidth selection - <!-- Radar Settings -->, <!-- Band Selection Setting -->
• Bandwidth settings - <!-- PRO1 Setting --> и <!—PRO2 Setting -->
• Language settings - <!-- Language Setting -->
• Reset to factory settings - <!-- Factory Setting -->
All settings have their own recording format tolerances:
- Some that have already been set as true or false, can be set only in this format. For example, Z-signature Filter ena-
bling/disabling: <
item value
=
”true”
name
=
”rdFilterZSignature”
/>
- Others (with a note on a possibility to enter data in numbers or letters) can be set directly by entering numbers or
ready-made commands.
For example, the Max Speed setting:
<
item value
=
”0”
name
=
”poiMaxOverspeedSetting”
/>
<!--
0, 80, 90, ... 180 (Unit: km/h)
-->
PRO1, PRO2.
The user can fully configure the hybrid using the PRO1 and PRO2 settings in the “Frequency Selection”
mode (if needed).
Respectively, the user can set certain settings for PRO1 and completely different ones with PRO2 in the Setup file. This
may be useful when the user often travels from one country to another where different types of radars are installed.
After such configuration, you may just switch between PRO1 and PRO2, instead of adjusting your hybrid each time
you go to a new country.