9
5. DVR Installation
Installation on the windshield
- Choose the installation location in advance, as the adhesive tape on the mount
is of single use.
- Degrease the mounting location and warm it up to ensure strong adhesion.
- Install the magnet holder into the device and turn the DVR on. When evaluating
the display image, make sure that the horizontal is kept and the lens captures the
image symmetrically both on the left and right side. Then remove the protective
film from the surface of the adhesive tape and lean and press the mount against
the windshield.
ATTENTION!
The device only operates when installed into the mount
properly.
