Quick Start Guide ePowerSwitch 8 M/S (M8 / S8) V.11/2006 Page
24
Example – controlling the first slave connected to the master:
(DIP switch of the slave: 1 = On and 2 = Off)
P20=1: <
Enter
> Switch all 8 sockets On
P25=0: <
Enter
> Switch socket 5 Off
Notes:
−
The commands are not case-sensitive, i.e. you can use both lower- and upper-case letters.
−
The ePowerSwitch sends an echo for each received character.
−
In Twin mode, sending a command to a specific socket number will also control its
corresponding twin socket.