8
The temperature range for charging a battery is -10°C -45°C. Do not charge batteries in
too high or
too low temperature.
Do not use the phone while charging.
It takes approximately four hours to fully charge a battery. Remove the charger quickly
after the
battery is fully charged.
T-Flash card
T-Flash card is a kind of multimedia memory card. You can connect the phone to a
computer with a USB cable to copy and move files between the T-Flash card and the
computer. You can also browse photo, audio and video files stored in the phone or T-Flash
card by the computer. Plug the smaller end oft he USB cable into the data cable jack oft he
phone, and the bigger end into the USB port of the computer. The GSM mobile phone shall
only be connected to a USB interface of version 2.0 or higher.
Switching the phone on
Press and hold the ending key to turn the phone on. The phone will automatically search
fort he network, if there is no password protection fort he SIM card and the phone. After
the phone is registered on the network, the name of the service provider will be displayed
on the idle screen. Then you can make or answer a call.
The phone remains in searching state if it fails to find the available network system
temporarily. After the phone is switched on, if a password is required, enter the correct
PIN code and press the Selection key for confirmation. After unlocked, the phone will
display the name of the registered network and the signal strength. Contact your network
operator if you do not know the PIN code. The default password of the phone is „0000“.
After the phone is switched on, if it displays „Insert SIM Card“ on the screen, press and
hold the ending key to turn the phone off, and check whether the SIM card is properly
inserted.
Switching the phone off
Press and hold the ending key to turn the phone off. After the switch-off animation is
displayed on the screen, the phone will be switched off.
Do not attempt to turn the phone off by directly taking out the battery.
4. Text Entry
When an editing screen is displayed, the current text input method is indicated in the
upper left corner of the display. To have more options to enter text, do one oft he
following ways to select the desired input methods:
Go to Settings > Phone settings > Preset input methods.
In editing screen, select Options > input method.
Changing the input method
Press the pound key repeatedly to select an input method.
Inserting symbols
Press the asterisk key and select the required symbols.
Numeric
When the input method icon is shown as „123“, input numbers directly with number keys.
Note: While using the numeric input method, you need to switch to other text input
methods to insert a space by pressing number key 0.
Multitap ABC and abc