2) Keep machine working under low mist level when room relative humidity is higher than 70% or in an enclosed room space.
3) Use clean water lower than 40 degree ( pure water is recommended)
4) Clean water tank and water flume when use again after a long time.
2.
Operation steps
1) Get the water tank out of the machine, unscrew the water tank cover and fill the tank with water, then screw back the water
tank cover tightly. Put the water tank on the machine base steadily.
2) Inspect whether the mist outlet nozzle is put well on the water tank.
3) Plug in the power, turn the knob clock wisely ., machine starts to work. To adjust the mist output from minimum to maximum
by turning the knob clock wisely. To adjust the mist output from maximum to minimum and to turn off the machine by turning
the knob counter clock wisely.
4) When out of water, the indicating light turns red and the machine stops working .Refill the tank then turn on the machine to
have machine work again.
5)
During the machine working, machine will stop working when take off the tank,put tank the water tank to the machine base,
machine will continue to work .
Cleanness & Maintenance
●
Before cleaning, turn the functional knob point to “ OFF”, take off the plug
1) Transducer
●
The water quality in someplace is too hard so that the transducer surface will be easy to scale fo rmation, The users need to
clean transducer with cleaning agent .
●
Add little cleaning agent on the transducer surface ( More or less depends on the scale ), then infuse water into the sink to soak
the sink fully for 10-15 min.
●
Clean with brush until scale disappear.
●
Clean twice with water
☆
Don
’
t clean transducer by any metal or stiffness material or scrape it to avoid any damage
2) Water tank inside
●
Clean water tank inside and water sink twice per week at least when use machine frequently
●
Use soft cloth wipe it when water tank side has scale
●
There will be some dirt stick to the tank inside wall, which can be cleaned with soft scour, Clear the scour completely
●
Don't put acid, alkalescency, blencher scour into water tank to avoid damage
3) Water sink inside
●
Take out the water in sink, Clean the scale by brush, then wiped by damp cloth
●
Flush it by water
●
Don’t pour water in sink directly when cleaning the water sink inside
●
Don’t use acid scour to wash the water sink inside to avoid damage on transducer
(4)Body and water tank outside
●
Wipe it with soft cloth, use soft scour when any dirty
(5) Storage
●
Drain out water in tank and body, clean the dirt, wipe out water and airing the machine
●
Ensure that no water in the machine and put it to the carton
●
Storage the package in dry place
