background image

 Page 37

Impedance Information

(Applicable to some countries of Middle East Area only)

This appliance MST2ABD-18CR-QB9 can be connected only to a supply with system impedance 
no more than 0.163

Ω

. In case necessary, please consult your supply authority for system 

impedance information. 

This appliance MST2ABE-22CR-QB9 can be connected only to a supply with system impedance 
no more than 0.186

Ω

. In case necessary, please consult your supply authority for system 

impedance information. 

This appliance MST2ABF-30CR-QB6W can be connected only to a supply with system impedance 
no more than 0.045

Ω

. In case necessary, please consult your supply authority for system 

impedance information. 

This appliance MST2ABF-30CR-QB9W can be connected only to a supply with system impedance 
no more than 0.085

Ω

. In case necessary, please consult your supply authority for system 

impedance information. 

This appliance MSTABD-18CR-QB8  can be connected only to a supply with system impedance 
no more than 0.188

Ω

. In case necessary, please consult your supply authority for system 

impedance information. 

This appliance  MST2ABF-32CR-QC0W  can be connected only to a supply with system impedance 
no more than 0.057

Ω

. In case necessary, please consult your supply authority for system 

impedance information. 

This appliance  MSTABB-12CRN1-B1  can be connected only to a supply with system impedance 
no more than 0.261

Ω

. In case necessary, please consult your supply authority for system 

impedance information. 

Summary of Contents for Skycold Nordic Series

























































































Reviews: