background image

a) The Neo Car Audio adapter set consists of the 3V9 interface, one iPod dock cable, and one vehicle-specific 

cable with optional accessories. 

      

                     

                      

 

NEO ProLink 3v9 Interface (1)                                      Docking cable (2)                                           Vehicle specific cable (3)          

 

Figure 1. Package contents 

 

b) The basic package does not include the optional accessories that you can purchase separately:  
 

                                                         

 

     
6FT 3.5mm phone jack cable with USB charging v9-AUXUSB                         Bluetooth Dongle (

BLUBTDV9

Figure 2. Optional Accessories (sold separately) 

 

c) The basic wiring diagram of the NEO Car Audio ProLink adapter is detailed in Figure 3: 

 

Figure 3. Basic wiring diagram. 

 

1.6 Important Compatibility Notes 

If your vehicle is equipped with an external factory CD changer, you must disconnect it in order to install the 

interface. You will lose the use of the external CD changer to gain the use of your iPod, Bluetooth or MP3 player. 

Any built-in CD changers will remain working. 

Summary of Contents for PAUD3V9













Reviews: