background image

3-Favorites 

4-House rhythms 

5-Smooth Jazz 

 “1-Andy’s songs” will be mapped to Disc 2; “2-Disco dance” will be mapped to DISC 3, and so on. Therefore selecting 

DISC 2 on car stereo will play “1-Andy’s songs” playlist; DISC 3 will select “3-Disco songs” and so on. 

Note: 

For stereos with disc ^ and disc 

V

 you may set up to 10 playlists, on some stereos up to 99. 

We strongly recommend that you organize your songs into playlists and enumerate them for proper operation of this unit. 

If your iPod does not have playlists/songs it may cause unpredictable outcomes and improper operation of the 

unit. 

EMPTY PLAYLISTS MAY ALSO CAUSE UNPREDICTABLE BEHAVIOURS, ESPECIALLY EMPTY PLAYLISTS THAT 

ARE LOCATED IN THE MIDDLE OF ALL OTHER PLAYLISTS. 

Note for iPhone users:

 Once connected to the NEO adapter, your iPhone will register a message stating “This 

accessory is not made to work with iPhone.” Simply dismiss the message. It may also ask if you want to “Turn ON the 

Airplane Mode.” Please answer “NO”. If the stereo still does not recognize the iPhone, please restart the iPhone 

3.6 When the car ignition is OFF  

When you turn your car stereo or car ignition off, the iPod will pause, it will then go into sleep mode or other default mode 

after being paused. In sleep mode, the iPod will still consume power—although very little—from the car battery. The iPod 

is NOT charging when ignition is off. There is no need to disconnect the iPod every time you turn off your car.  

However, 

it is strongly advised that you disconnect the iPod if you do not plan to operate your car for extended 

periods.

 

3.7 Using EXT1 for AUX-IN on your NEO 3V9 adapter 

You can connect any alternative audio sources such as MP3 player, DVD, GPS, XM and etc. to the Neo Car Audio 

adapter via Mini Din to RCA and 3.5mm phone jack cable (must be purchased separately, is not included in the basic 

package).  Connect MiniDin end of the cable to the adapter. Connect 3.5mm end to the audio source. Turn ON the audio 

source and the stereo. Put stereo into CD changer mode. The music will start playing. We recommend that you unplug the 

iPod/iPhone from the dock connector if you are using the AUX-IN RCA 3.5mm cable on Neo Car Audio adapter. If you 

don’t unplug the iPod/iPhone and connect the 3.5mm audio source at the same time some sound interference may occur. 

3.8 Using EXT1 for Bluetooth connection on your Neo Car Audio 3V9 adapter 

You may connect the NEO Bluetooth Dongle to the EXT port on the 3V9 adapter for the hands free use of your mobile 

phone and wireless music play. Please refer to the NEO Bluetooth Dongle manual that is supplied with your Bluetooth 

Dongle. You can also access the manual online at NEO Car Audio website 

http://neocaraudio.com/pdf/BLUBTDV9.pdf

 

The Bluetooth and iPod cables can be connected at the same time and work simultaneously. 

 

 

 

 

 

 

 

 

 

 

 

 

 

Summary of Contents for PAUD3V9













Reviews: