Safety Warning for Batteries
The product contains batteries. Please remove the batteries when the device is not used. Do not mix
batteries of different charging level or different brands.
Installation
Door Sensor Installation - Option One
Disassemble the door sensor main body and take out battery, fix the main body on the door with
screws.
Disassemble the door sensor deputy body and fix it on the corresponding door frame position
Option Two
Put the sticker on the bottom of door sensor then fix it on the wall.
NOTE:
When installing door sensor, door sensor deputy body must be installed on the bulge side of
the door sensor main body.
1.When install door sensor, the distance between main body and deputy body should be less than
2cm in the state of door closed.
2.When door is closed, that is to say, distance between main body of door sensor and deputy body is
less than 2cm, app would display door is closed.
3.When door is opened, that is to say, distance between main body of door sensor and deputy body is
more than 2cm, the app would display the door is opened. Through gateway, door sensor can
associate with ip-camera to take pictures and record video, siren to alarm.
4.Make sure door sensor is placed in the Z-Wave network range of gateway.