NAS‐CW01W6
深圳市丽欧电子有限公司
Version1.0.3
Add Equipment
The device is powered on in Smart wifi mode by default (the indicator blinks at short
intervals).
If the indicator is off, hold down the reset button for 6 seconds and
select the mode corresponding to the indicator to add a device
1.Select a device type to add
Note: All Wi-Fi products can be added with any Wi-Fi option. The device only supports
2.4GHz Wi-Fi signal. This manual uses the socket option
（1）Smart config
mode:Press the reset button to switch device status until the
device changes to Smart Config mode, and then add (please follow the instructions
of the APP).
