NAS‐CW01W6
深圳市丽欧电子有限公司
Version1.0.3
Note: 1. Both Smart Wi-Fi mode and AP compatible mode have Bluetooth mode.
2.If the device does not enter the pairing mode after the first power-on, then
press the reset button for 6 seconds
3. When the device enters to be configured or switches to be configured mode, a
prompt tone will be played
Features
1. If the device is successfully connected to the network, the indicator switches from blinking at
short intervals to off.
2.Hold down the reset button for more than 6 seconds to disconnect the network and enter the
network configuration state.
3.When the device is powered on for the first time, the device does not enter the pairing state
automatically.
4.Press the temperature scale switch button to wake up the device. Then the temperature scale
switch can be set successfully and report to the APP.
5.Support Bluetooth pairing , open bluetooth and search device automatically.
6.Light value
±
20Lux will automatically report data.
7.Light display up to 9999Lux.
8.Temperature and humidity have sensitivity parameters settings, and the data will be reported
when the set parameter value is reached.
9.The default time is used when the smart clock is disconnected from the network. After the
smart clock is connected to the network, the time can be synchronized.
10.When the device alarm and alarm bell ring, press the reset button and the temperature scale
button to stop the alarm.
11.Set a maximum of five alarm clocks.
12.For the first time, the device will automatically calibrate the time, and the calibration switch
must be turned on.
13.When the device is sleeping, you can set the temperature scale, temperature and humidity
sensitivity, buzzer switch, and network time adjustment switch in cache. When the device reports
data next time, the data will be reported together with the cache Settings.
14.Humidity sensitivity 0.3
℃
‐‐ 2.0
℃
, humidity sensitivity 5%‐10%.
15.Before adjusting parameters and buzzers, ensure that the device is connected the
network.
16.After the device is connected to the network, the signal icon on the LCD is displayed
online.
17.After the device is disconnected from the network, the signal icon on the LCD shows that the
device is offline
。
18.The reporting range of illumination value
