manualshive.com logo in svg

NEO M54N, User Manual, Page: 129 / 158

Share
Download
NEO M54N User Manual Download Page 129

Troubleshooting

Display 8 - 9

8

Display

Problem

Possible Cause - Solution

Nothing appears on
screen.

The system is in a power saving mode

. Toggle the 

Fn + F4 

(see 

“Sleep Button” on page 3 - 8

)

sleep/resume key combination.

The screen controls need to be adjusted.

 Toggle the screen control key combinations 

Fn + F8/F9

.

If you’re connected to an external monitor, make sure it’s plugged in and turned on. You should
also check the monitor’s own brightness and contrast controls.

The computer is set for a different display.

 Toggle the screen display key combination, 

Fn + F7

. If

an external monitor is connected, turn it on.

The screen saver is activated. 

Press any key or touch the 

TouchPad

.

No image appears on the
external monitor I have
plugged in and powered
on.

You haven’t installed the video driver and configured it appropriately from the Control Panel.

 See

“Intel Video Driver Controls” on page B - 1

 for instructions on installing and configuring the

video driver.

Summary of Contents for M54N































































































































































Reviews:

No comments