background image

SAFETY INSTRUCTIONS

1

1.

Read the instruction manual carefully before use and keep for

 

future reference. Failure to comply with the instructions can result

 

in death, serious injury or property damage.

2.

For outdoor use ONLY! Do not use indoors.

3.

Do not use below ground level.

4.

The 

accessible

 parts can get very hot. Keep small children, 

elderly

 

people and animals away from the gas grill. 

The use of a 

g

rill glove is advi

s

ed.

5.

Do not move the product while it is alight

 or hot, wait for the 

product to cool down fully before moving. 

6.

Turn off the gas supply at the gas cylinder when the grill is not in

 

use or after use.

7.

Any modification of the product, misuse or failure to follow the

 

instructions may be dangerous and will void the warr

a

nty.

8.

Check your gas grill an

n

ually for 

any 

leaks. Check whether the 

hose

 

connections are tight and leak test them each time you 

reconnect

 

the gas cylinder.

9.

Do not use the gas grill within 1 meter of combustible materials

or surfaces.

10.

LP gas cylinders should not be placed directly underneath the 

grill.

11.

Open the hook of the grill before lighting.

12.

Do not leave the grill 

unattended

 when it is lit.

13.

Be careful when opening the hook, as the hot steam inside is

 

released upon opening.

14.

Do not cover the grill until it has completely cooled down.

15.

Do not use aerosols near the grill.

16.

Do not store or use petrol or other flammable vapors or liquids 

in

 

the vicinity of this gas grill or any other appliance.

17.

If you smell gas, turn off the gas supply at the gas cylinder;

 

extinguish any open flame; open the hood. 

Stop using 

immediately

.

Summary of Contents for GAS-5BURN-BBQ





















Reviews: