Your iPod/iPhone/iPad is locked for control and only operated via car stereo buttons. In this mode all
data is synced between the stereo and iPod which allows you to see current information such as track
time, number and playlist (disc) number. Text is also available for certain stereos. In order to use this
mode you have to prepare your iPod as explained below.
The advanced mode is always on for disks 2-9. To switch to simple mode just select DISC 1 “Ok to
disconnect” is shown on the iPod display while it is connected to this unit. The click wheel of the iPod is
disabled when in this mode. Volume control is available from the steering wheel and from the car stereo
controls in both modes.
Note: iPhone/Pod touch/iPad with newer than iOS7 will not lock out in Advanced Mode.
3.2.1. SIMPLE MODE
In simple mode, your iPod/iPhone/iPad music player behaves in its usual fashion, with the clickwheel
and display being functional.
The following controls are possible from the car stereo:
- Next track
When pressed on the car stereo, the iPod will jump to the next song and the car stereo track number
will increase by one number (1).
- Previous track
When pressed on the car stereo, the iPod will jump to the previous song and the car stereo track
number will decrease by one number (1).
- Fast Forward
When pressed, the iPod will start moving quickly through the current track.
- Fast Reverse
When pressed, the iPod will start rewinding the current track.
- Play/Pause
When the stereo is turned to the CD changer mode, the iPod will automatically start playing.
Turning the stereo off or switching to another source (FM, AM, etc.) or MODE (USB, AUX) will cause the
iPod to pause the current track.
- Disk Change
When changing the disk other than 1 the iPod will switch to the Advanced Mode
None of the information displayed during the simple mode is related to the song currently playing. The
display will show:
DISC 1 TRACK xx TIME 00:00. Track information can change from 00-99.