NEO 4V9 interface
One Automotive grade USB 3FT
One Vehicle specific cable
Optional Accessories (Not Included. Must be purchased separately)
AUX MiniDin 3.5mm USB charge cable
NEO Bluetooth Dongle
1.9 Important Compatibility Notes
- If your vehicle is equipped with an external factory CD changer, you must disconnect it in order to be
able to install the NEO interface. You will lose the use of the external CD changer to gain the use of your
iPod, iPhone, Android, Bluetooth or MP3 player. The built-in CD changer will remain operational. SAT if
present may need to be disconnected in some case.
- If your vehicle has factory SAT and NEO adapter is using SAT emulation, you must disconnect factory
SAT to gain the use of your device, iPod, Bluetooth or MP3 player. This is applicable to Nissan/Infinity
with SAT emulation, Honda/Acura 03 and up with SAT emulation, Ford/Lincoln/Mercury, Mazda 3,5 08-
09 and Subaru 07-09. For a full version of the NEO compatibility guide, please visit
http://www.neocaraudio.com/contact_us.php
1.10 USB/EXT1/EXT2 ports
It is recommended for you to use NEO automotive grade USB extension cable. It will ensure better
connection using the latch system that withstands the moving vehicle conditions. In addition it will
prevent the wear-out of USB port on NEO 4V9 adapter.
Please refer to the Figure below for the proper connection of the accessories to the EXT1/EXT2 ports on
NEO 4V9 module.