NEO TOOLS 75-202, Instruction Manual

Page: 10 / 56

10
neo-tools.com
ORIGINAL MANUAL (INSTRUCTION)
LASER DISTANCE METER :
75-202
CAUTION: Before using the device read this manual carefully and keep it
for future reference. Failure to follow safety rules from this manual may cause tool
damage or body injuries.
WARNING: Do not look directly at the source of laser beam.
Follow the below safety rules.
1. Do not modify the tool.
2. Use the laser device in accordance with the manufacturer’s instructions.
3. Do not intentionally point the laser beam at people or animals.
4. Do not point the laser beam at bystanders’ or animals’ eyes. Laser radiation
may damage your vision.
5. Always make sure the laser beam is not directed at reflective surfaces.
Reflective surface could project the beam at operator or bystanders.
6. Do not allow children to operate the device. Do not allow children in the
workplace when setting up and using the device.
7. When not using, store the device in a dry place, beyond reach of children.
8. Do not replace the laser unit with device of other type. All repairs must be
carried out by the manufacturer service.
9. The tool is equipped with class 2 laser device compliant with EN 60825-
1:2014.
INTENDED USE
The device is designed for personal use only. It can be used to
measure length, area and volume. Use the tool indoors in dry environment
only.
Observe the following instructions when working for the best device
operation. Any use other than described below is not allowed and may cause
device damage.
Parameter Value
Measurement range 0.2 to 20 m
Measurement accuracy ± 2 mm
Operating temperature 0 0 – 40 0
Laser class 2
Laser wavelength 630–670 nm
Laser power < 1 mW
Battery type 2 x AAA 1.5 V batteries
Available measurement units m/ft