Preparation
Power ON/OFF
*
Press the power button; the LED light will be turned on in 1 second.
* When the pen is on, press the power button for 2 seconds, the LED light will start flashing
and the pen will turn off.
* If there is no action taken for more than 10 minutes, the pen will turn off automatically.
(You can change the auto-power-off time in settings.
Using a longer auto-power-off time will result in shorter usage time if the pen is frequently idle).
# Reset
Please reset the pen if it does not turn off, won't
charge, or stops working. To reset the pen to
factory defaults, press and hold the power button
for 10 seconds, the pen will be turned off and
restart. (Internal data will be saved.)
Allowable
Recognition Angle
Product’s acceptable
recognition angle is
-20° ~ +40°.
(90° vertical standard)
Usage Angle
Hold the pen and maintain
a natural writing angle.
Holding the Pen
* The recognition rate is affected by the direction of the optical
sensor’s angle. The sensor (oval shaped part adjacent to the pen
tip) should face downwards.Deviating from the appropriate
degree, or holding the pen in the wrong direction could cause
difficulties with capturing your writing or drawing.
Summary of Contents for Dimo
Page 1: ...User Guide dimo...
Page 6: ......
