9
Borrego Matrix Switch User’s Guide (DOC42-00004-D_NeoPro-Borrego.doc)
Control Sequence
The command sequence for controlling the Borrego matrix switch
from an IR remote control is exactly the same as controlling the
switch from the front panel. If you have skipped ahead to this
section, please go back and read the section “Controlling from the
front panel” first.
In addition to (In/Audio/Video), (number), (Out), (number)
sequence as mentioned above, the IR remote is also capable of a
shortcut method which will treat the matrix as a regular switch.
Pressing “Select” then a number if the desired input, will switch all
outputs of the matrix to that selected input source.
Matrix status
To view the current connection status of the matrix, use the IR
remote left and right arrow keys. Each screen will show the current
status of one output (see figure 1). The first line of the display
shows what inputs are currently connected to that output. In some
cases, the input numbers may be different, indicating that audio
and video have been switched separately.
At any time the user may press exit to return to the home screen, or
wait 10 seconds and the home screen will return on it’s own.
HD:1 CV:1 L+R:2
< Output 1 >
Figure 1 - "HD" shows input status
of component video,”CV” shows
input status of composite video (or
SPDIF), and "L+R' shows input
status of analog audio.
