12
Borrego Matrix Switch User’s Guide (DOC42-00004-D_NeoPro-Borrego.doc)
Care and Maintenance
The Borrego matrix switch does not require any regular
maintenance besides keeping it clean.
Never use harsh cleaners or solvents on the Borrego front panel.
There are several dusting products for electronics, and standard
glass cleaner may be used.
Spray any liquids onto a towel first, then wipe the front of the
Borrego with the moist towel.
Should the Borrego matrix switch fail to operate as expected,
please contact NeoPro for service advice. THERE ARE NO
ADJUSTMENTS OR USER SERVICEABLE PARTS INSIDE
THE CABINET.
Restoring to Factory Defaults
Just in case you should disable the front panel or IR input via the
USB or RS-232 port, you may require a way to restore those
features without using the ports again. To restore the Borrego
matrix switch back to factory settings, do the following:
ü
Unplug the unit for 10 seconds, then plug it back in. The
Borrego should be in standby mode.
ü
On the front panel, slowly press 0, 0, 7.
The unit will then enter Initialization, and when complete, return to
standby mode. The front panel and IR will work as normal.
