ILDW-7090524-00D-31
12
1
：
When the display of the host computer shows Fixt= ALL. This
indicates that it runs normally.
Whatever the Fixt value is, it will receive the data from master
fixture.
2
：
When the Fixt value of the master is ODD, the program of the master
will run normally under the condition that the SLAVID value of the
master is odd number. The slave fixture will receive data from the
master under the condition that the SLAVID of the slave is odd.
3
：
When the Fixt value of the master is EVEN, the program of the
master will run normally under the condition that the SLAVID value
of the master is even number. The slave fixture will receive data
from the master under the condition that the SLAVID of the slave is
even.
4
：
When the display of the host computer shows Fixt= MASTER. This
indicates that it runs normally.
Whatever the Fixt value of the slave is, it will not receive the data
from master fixture.
5
：
When the display of the host computer shows Fixt= SLV01
（
XX=
（
01-29
）
, the master runs normally.
The slave fixture will receive data from the master under the
condition that the Fixt value of the slave fixture is SLV01.
When the display of the host computer shows Fixt= SLV02
（
XX=
（
01-29
））
, the master runs normally.
The slave fixture will receive data from the master under the
condition that the Fixt value of the slave fixture is SLV02.The rest
will be deduced by analogy.
ⅳ．
TSET Mode
：
Instruction
：
Step1
：
When the display shows the main menu HELLO, the dot flicks. Then
press UP/DOWN for a short second. It will show TEST. Then press MODE for a
longer time until the display shows submenu RED.
Step2
：
Press UP for a short time, the display showing RED does not flick.
Then press MODE for a short time until the submenu RED flick when all red LEDs
of the two fixtures begin to be visional. Then press MODE for a short second until
the submenu RED does not flick when all red LEDs are off.
Step3
：
Press UP for a short time, the display showing GREEN does not flick.
Then press MODE for a short time until the submenu GREEN flick when all green
LEDs of the two fixtures begin to be visional. Then press MODE for a short second
until the submenu Green does not flick when all green LEDs are off.
Step4
：
Press UP for a short time, the display showing BLUE does not flick.
H E L L O
T E S T
R E D
G R E E N
B L U E
A L L
O D D
e v e n
m a s t R
S L v x x
Summary of Contents for VariFlood Duo
Page 20: ...ILDW 7090524 00D 31 20 ...
