Neo Instruments VENTILATOR II, Owner'S Manual, Page: 27 / 32

27
Depending on the speaker, amp, and your taste in tone, the
GIT settings can yield interesting results in combination with
organ sounds, as can the KEY setting with guitar amps.
REMOTE
This parameter determines the function of the remote control
jack socket. It is possible to connect a volume pedal (YAMAHA
FC-7 or similar), a passive remote switch (unlatched), the
VENTILATOR remote / remote II or a CU-1 Halfmoon switch.
The corresponding pot positions for selecting the modes are
7 - 9 - 12 - 3 - 5 o’clock.
Pos Mode Functionality
7.00 Switch1 Stop/Slow/Fast control by external unlatched
switches (Ventilator remote II)
Ring to Sleeve = Slow / Fast,
Tip to Sleeve = Stop
9.00
Switch2 Stop/Slow/Fast control by external latching
switches (Ventilator remote,CU-1)
12.00
Speed SPEED is continously controllable by an
expression pedal. Available Speed range is
set by the SLOW SPEED pot (=pedal
minimum) and the FAST SPEED pot (= pedal
maximum). If Slow Speed is set to zero, the
Pedal minimum activates Stop. Slow/Fast
and Stop Switches are not active in this
mode.
3.00 Mix
Parameters MIX/DIST LO and MIX/DIST HI
are continously controllable by an expression
pedal. Available range is zero up to the value
set by the MIX/DIST knobs.