8
Controlling the MediaLink SIRIUS source (available in SAT emulation only)
•
Stations can be saved to PRESET 1-6 by holding the desired PRESET button, while
listening to the station.
•
TEXT button will toggle between the text fields.
•
If a Sirius Connect compatible tuner is not detected, then either a “No Tuner” message is
displayed, or the SIRIUS option will not be selectable. Please refer to the factory manual
of your radio system about operating the Satellite mode.
•
Go to Channel 000 to view the Sirius Tuner ID for activation. The 12 digit SID display
format is in two halves as SID “123456-” followed by “-789ABC”.
Bluetooth & MAT (Music Announcer Technology) configuration
To alter voice announcement and Bluetooth pairing settings select Bluetooth as your audio
source, press the preset button that corresponds to the feature you want to configure, and then use
track or channel UP/DOWN to browse through configuration options:
•
PRESET/DISC
1
,
2
or
3
should be selected if you want to control Bluetooth audio
streaming playback.
•
PRESET/DISC 4
controls the Autoconnect feature. Available options are Enable and
Disable. This controls whether or not the MediaLink will reconnect automatically when
phone becomes disconnected. Only the most recently paired device will be reconnected
automatically.
•
PRESET/DISC 5
controls the paired devices memory. There is only one option. Tune or
change tracks to clear the listing of paired devices with the MediaLink and put module
into discoverable mode.
•
PRESET/DISC 6
controls MAT setting. Available options are Default, Extended, Phone
only, and Off (refer to the chart below).
Pairing MediaLink with your cell phone via Bluetooth
1. Turn on the Bluetooth feature on your cell phone.
2. Select MediaBridge as your audio source from your radio, then select Bluetooth mode.
3. Search device from your cell phone.
4. Select MediaBridge from device list and enter password “0000” to connect.
Note: MediaLink is only discoverable for Bluetooth pairing for the first 60 seconds after selecting
Bluetooth mode within the MediaLink. This is indicated with a “DISCOVRABL” message on the
radio display. Please perform pairing while the vehicle is parked. Bluetooth devices remain paired
30 seconds after exiting MediaLink mode, within this time active audio streams and phone calls
aren’t audible on the phone but can be resumed by re-entering MediaLink mode.
