2
Warning and safety!
Please read these instructions carefully before proceeding. Failure to follow instructions may
result in improper operation or injury. Neither Neo Car Audio nor Apple Inc., its regional offices,
distributors or resellers take any responsibility for any damage or injury as a result of using the
integration kit.
•
Do not open, disassemble or alter the interface in any way.
•
Do not insert anything into the casing.
•
Do not cut or try to alter cables in any way and always use the correct connections.
•
Only operate unit when stationary or ask passengers to operate it for you.
•
Do not allow the Apple iPod/iPhone to distract you from driving.
•
Exercise good judgment and keep your eyes on the road at all times.
•
Do not expose unit to extreme temperatures, humidity or shock.
•
Keep the unit and iPod/iPhone away from fluids.
•
Keep away from children! - Interface components may contain small parts, can be broken
or disassembled and components may become loose from vibration and heat. Small
components and packaging materials may be a choking hazard when handled by children.
Congratulations on your purchase!
Thank you for purchasing this integration kit. Please review this booklet before operating the unit.
This interface was designed and manufactured to seamlessly integrate with your vehicle’s factory
audio system.
MediaLink kit contents
DIP switches overview
The configuration switches located on the MediaLink module are used to set various operation
modes of the interface. Incorrect DIP switch settings may cause the interface to not work properly
or to not operate at all. Disconnect the vehicle harness from the module and set the ignition to the
off position for 60 seconds after changing the switches then reconnect the module!
